注重警示柱模具的选材是提高警示柱模具质量的重要一步，警示柱模具材料的选用既要满足客户对产品质量的要求，还需考虑到材料的成本及其在设定周期内的强度，当然还要根据模具钢材的类型、使用工作方式、加工速度、主要失效形式等因素来选材。焊接本身会产生很高的温度，如果加强筋过多就会因为长时间的焊接导致钢板受热变形。为了减少模具损坏，标志桩模具公路界桩模具加强筋的厚度必须小于等于产品壁厚，否则会引起模具表面缩水，另外加强筋的单面斜度应大于1.5度，以免顶伤模具。重视制造过程的加工精度是确保模具质量的重要一环，模具制造过程中的加工方法和加工精度也会影响到模具钢材, 标志桩模具中具代表性的标志桩模具采用天然无毒无味的新型复合材料,从桩体的设计到实际的使用都能算的上是上乘之作,标志桩模具采用钢这种复合材料制作,重量轻,抗腐蚀,抗老化,桩身简明,适合于多种不同的环境使用,即使在急剧恶劣的环境下也不会造成任何的副作用。

The material selection of the warning column die is an important step to improve the quality of the warning column mold. The selection of the warning column die material should not only meet the customer's requirements for the product quality, but also take into account the cost of the material and the strength within the set cycle. The main failure form and other factors to select material. The welding itself will generate very high temperature. If the reinforcement is too much, the steel plate will be heated and deformed because of the long time welding. In order to reduce the damage of the mould, the thickness of the reinforcing bar of the mark pile mould must be less than equal to the wall thickness of the product, otherwise the surface of the mold will shrink, and the single side slope of the reinforcement should be greater than 1.5 degrees to avoid the top wound die. The importance of machining precision in the manufacturing process is an important link to ensure the quality of the mold. The processing methods and precision of the mould manufacturing process will affect the die steel. The representative marker pile die in the mark pile die adopts a new and nontoxic and tasteless new composite material, which can be calculated from the design of the pile body to the actual use. The mark pile die is made of steel composite material with light weight, corrosion resistance, aging resistance, simple pile body, suitable for use in a variety of different environments, and no side effects can be caused even in a sharp and harsh environment.