在标志桩钢模具整个的生产过程中值得注意的有四点：

There are four points worth noting in the whole production process of the steel mould for the mark pile:

一是要检查生产机器在生产之前是否是完好的，每个接口处是否保持连接无缝隙。

One is to check whether the production machine is intact before production, and whether each interface is connected without cracks.

二是为了水泥制品标志桩，隔离墩，路沿石等脱模方便，在生产之前图上一层机油是先见之明。

Two is for cement products mark pile, isolation pier, road along the stone and so on easy to release, before the production of oil on the map is foresight.

三是检查震动平台是否放在平整的地方，禁止在生产过程中停止，这样会损坏模具的质量。

Three is to check the vibration platform is placed in the flat place, prohibit in the production process to stop, this will damage the quality of the mold.

四是钢模具的脱模简单，将模具拆卸的时候要轻放轻拿。

Four is the steel mold demoulding simple, when the mold disassembly should handle gently take.