河北保定标志桩模具厂

标志桩模具生产工艺原理

Production technology principle of mark pile mold

准备标志桩模具一个，震动平台一个，搅拌好的混凝土

Prepare a mark pile mold, a vibrating platform, a mixing concrete

将模具放置在平整的地面上，将混凝土灌入模具中，放在震动平台上震动片刻

Place the mold on the flat ground, pour the concrete into the mold, and vibrate on the vibrating platform for a moment

放置在避光避光的地方养护

Keep in a place where it is protected from light and light

夏季钢模具12小时，每天能脱两次模；冬季放置24小时，每天脱一次模；塑料模具夏季24小时；冬季48小时即可。

In summer, the steel mould can be removed two times every day for 12 hours. 24 hours in winter and a die every day. The plastic mould is 24 hours in summer and 48 hours in winter.

待水泥凝固后，自然脱落即可

After the cement is solidified, it falls off naturally